Tectron Data Sheet

||Tectron Data Sheet
Tectron Data Sheet2017-01-23T10:02:20+00:00

Tectron…

Mechanical ASTM Test Method Value Units
Strength to Weight Ratio - - ksi
Specific Gravity @73 F D792 1.35 -
Tensile Strength @73 F, (ult)/(yld) D638 13,500 (ult) psi
Tensile Modulus of Elasticity @73 F D638 500,000 psi
Tensile Elongation at Break @73 F D638 15 %
Flexural Strength @73 F D790 21,000 psi
Flexural Modulus of Elasticity @73 F D790 575,000 psi
Shear Strength @73 F D732 9,000 psi
Comprehensive Strength, (% Deformation) @73 F D695 21,500 (10) psi
Comprehensive Modulus of Elasticity @73 F D695 430,000 psi
Hardness, Rockwell, Scale as noted @73 F D785 M95 (R125) -
Hardness, Durometer, Shore D @73 F D2240 D85 -
Izod Impact, (Notched) @73 F D256 Type A 0.6 ft-lb/in of notch
Coefficient of Friction, (Dry vs Steel) Dynamic - 0.40 -
Limiting PV, (with 4 to 1 factor of safety applied) - - psi-ft/min
Thermal ASTM Test Method Value Units
Coefficient of Linear Thermal Expansion @73 F E-831 (TMA) 2.8 E-05 in/in/F
Heat Deflection Temperature @264 psi D648 250 F
Tg-Glass transition termperature, (Amorphous) D3418 - F
Melting Point, (VS=Vicat Softening Temp.) D3418 540 F
Continuous Service Temperature in Air, (Max.) - 425 F
Thermal Conductivity - 2.00 BTU-in/hr-ft2-F
Electric ASTM Test Method Value Units
Dielectric Strength, Short Term D149 540 Volts/mil
Volume Resistivity D257 4.5 E+16 ohm-cm
Dielectric Constant @10E6 Hz D150 3.0 -
Dissipation Factor @10E6 Hz D150 0.001 -
Flammability @3.1 mm unless noted UL94 V-0 -
H2O ASTM Test Method Value Units
Water Absorption, Immersion, 24 hours D570(7) 0.01 % by weight
Water Absorption, Saturation D570(7) 0.03 % by weight